Kippzonen 2AP Sun Tracker Manuel d'utilisateur télécharger pdf (Page 51)

INSTALLATION AND SETUP

Figure 4.34: Setting Time, Location, Mean Local Pressure and Start Suntracking.

Main Menu, Suntracker Setup Procedure, page 12.

Note: When the time has been set directly to GMT ensure that the Time Zone is set to

Greenwich Mean Time as well.

4.6.2 Setting the Location

The 2AP requires the correct local geographical coordinates (Latitude, Longitude) and mean local

pressure to accurately track the sun, see figure 4.34. The mean local pressure is mainly dependent

on the altitude of the 2AP’s set up location.

• Enter the Latitude and Longitude in the designated boxes in decimal numbers (at least

three decimal places). Use the “North/South” and “East/West” buttons on the right to

confirm the positive or negative terrestrial Hemispheres.

• Enter the mean local pressure at the site. If the mean pressure is unknown, enter the

altitude for the site (above sea level) and press the “Calculate Pressure” button. The correct

pressure will appear in the Mean Local Pressure text box.

• Press the “Set Location” button to save the instrument location into the 2AP.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 109 110

Pas de commentaire

Kippzonen 2AP Sun Tracker Manuel d'utilisateur Page 51